View Enquiry List 
Air Jet Erosion Tester
The AJ-1000 High-Temperature Air Jet Erosion Tester uses double disk velocity measurement. Conforms to ASTM G76 and G211-14.
WhatsappOverview
Air Jet Erosion Tester Overview
Main Features:
- Conforms to ASTM G76, ASTM G211-14
- Automatic in-line sample and particle velocity measurement
- Open platform allows mounting real samples and test coupons
- Fully automatic – run and test data with a click of a button
Perform repeated impact tests with Rtec Instruments’ Air Jet Erosion Tester, the AJ-1000. To do this, the tester utilizes a jet of gas loaded with abrasive particles. As a result, the AJ-1000 can measure samples’ precise erosion. Additionally, the machine comes with temperature control up to 1200°C and closed-loop temperature. Furthermore, the AJ-1000 ranks the erosion of various materials and coatings. It does this by subjecting samples to different abrasive particles of various shapes, sizes, temperatures, and impact speeds.
AJ-1000 FeaturesAutomated Positioning Stage An automatic stage moves the sample for ease of use. Meanwhile, the velocity measurement system provides precise measurements. Uniform Temperature The AJ-1000 can go up to 1200 °C temperature (multiple ranges available). As a result, study the effect of temperature with in-line temperature monitoring and PID closed loop control. |
Closed loop High Speed Double Disc Velocity Measurement The time-of-flight of the particles is determined over a controlled path length between two rotating disks. Servo controlled rpm, high speed double disc velocity for precise process control in real time. Mixing and Impingement Angle Software parameters control the mixing of hot air and erodent particles. In addition, the angles of impingement change to various positions – from 0 to 90 degrees. |
Erodent Particle Feed System Stainless steel hoppers and vibrator with programmed motorized screw conveyor. Erodent feed rate– 1 -10 gm/min (higher range available) |
A Look Inside the AJ-1000
Each AJ-1000 includes an air pressure controller and a pressure gauge. Standard or user selected abrasive media are capable of evaluation.
|
Internal |
Erosion Sample |
High Temperature Furnace |
Solution ToThe AJ-1000 Air Jet Erosion Tester operates across a wide variety of industries: |
Aerospace
Metal
Polymer
|
