Brands

The RSD200 can evenly divide one sample to 6, 8, 10 uniform small samples. Each small sample has the same physical and chemical properties, and can represent the attributes of the whole batch of samples. Currently, the divider is the most accurate sample dividing device on the market.

Automatic Fusion Machine Auto-F40 adopts the glass flux sheet method to prepare a fused glass sheet for samples such as cement, lime, catalyst, mining and geological materials, refractory materials, glass, dioxygen, powders of silicon, bauxite, alumina, etc. Glass sheets are mainly used for X-ray fluorescence spectroscopy (XRF) analysis.

Stable and qualified tablet is important precondition to XRF analysis. Pellet press instrument is widely applied to NIR and ICP analysis pretreatment as well. Automatic pellet press BP40 provides strong tablets with smooth surface. Pressure can be adjusted and different size of steel rings are optional according to application. Application Minerals, cements, residuals, glass, ceramics Working principle Fill the fine powder samples after grinding.

With the rapid development of science and technology, DNA detection and polymer analysis are becoming more and more important. ln order to maintain the original components and biological information of samples, it is necessary to adopt low-temperature pulverization. CryoGrinder LM200 chills the sample in liquid nitrogen and pulverize them with a magnetically driven impactor. The sample become brittle and the volatile components are preserved under the low temperature, so that a good grinding effect can be achieved.

High performance mini Planetary Ball Mill NM200 has a wide range of applications and is ideal for lossless grinding of hard, medium hard and brittle materials up to the final fineness of 100 nm. Besides dry grinding, size reduction can also be done in suspension or inert gases depending on the desired final fineness. In addition to crushing, you can also use NM200 to mix and homogenize emulsion and paste samples or apply them to mechanical activation and alloying materials research.

The Micro ball mill GT300 is designed for modern laboratory applications. It can process small amount and large batch sample, for example: plants, animal tissue and small quantity samples in dry, wet or cryogenic condition. It can mix and homogenize powders and suspensions in only a few seconds. It is also perfectly suitable for the disruption of biological cells as well as for DNA/RNA and protein extraction.

Mortar Grinder MG200 is used to grind, homogenize and mix a wide range of samples with dry/wet or cryogenic condition, which can grind hard, soft, brittle and pasty samples. They have extraordinary performance on the processing capacity, as well as easy and safe to operating.

Planetary Ball Mill BM20 is suitable for grinding(dry\wet) and mixing some soft, hard, brittle and fibrous samples ,which are used wherever the highest degree of fineness as customer required, as well as the grinding result is reproducible. Apart from the classical mixing and size reduction processes, the mills also meet all the technical requirements for colloidal grinding.

CM200 is an ideal machine for the sample pretreatment of heavy-metal-free RoHS and WEEE test. It is always used to process solid samples in batch or continuously, For the long fiber and big volume sample it can process directly and do not need the pre-crush.

Ultra Centrifugal Mill FM200 applies to a wide range of samples. Based on its high efficiency grinding technology and rich accessories, with two-steps grinding of rotating knife – ring screen system, it can process dry and wet grinding in a very short time for the soft, hard, brittle, fibrous samples.