The system can be placed directly inside the environment under treatment. It can be equipped with a trolley with built-in balance to easily move it in different areas. It works on stand-alone mode or can be managed through a remot...
Transporters can dock to the Class III BSC or vivaria doors equipped with interlocking Rapid Transfer Ports (RTP), thereby eliminating containment breaches and potential animal injuries or escapes.
The LabGard® ES NU-813 Class I Biological Safety Cabinet can be used as a balance enclosure or ductless fume hood for personnel protection for the safe handling of low risk powders, liquids, and animal necropsy.
LabGard® model NU-543 is available in an 8, 10, or 12 inches (203, 254, or 305 mm) access opening. NU-543 is an effective primary engineering control in obtaining the optimum product quality while reducing the potential for expos...
Simple glove box used for general isolation and / or containment.
Our glove boxes are designed to be just what they are called, "Basic." They are engineered to fit general laboratory isolation applications. They can be easily mod...
The LabGard® ES 427 Biological Safety Cabinet may be used for work with minute quantities of volatile chemicals and tracer amounts of radionuclides if it does not interfere with the work in the re-circulated downflow.
The LabGard® ES NU-430 Total Exhaust Biological Safety Cabinet may be used for work with non-flammable, non-explosive volatile chemicals and radionuclides by providing personnel, product, and environmental protection by exhaustin...
The incubator is an essential part of the cell culturing process. The only drawback is the exposure to ambient air. Processing cells contained solely in an incubator is widely accepted, though it creates numerous complications.
The C-Shuttle laboratory glove box is part of a practical system for handling your cells under the same conditions at which they incubate. It provides ample workspace where you can handle and manipulate your cells without disrupti...
The I-Hood holds any incubator while continuously sweeping all exhaust away. This laboratory fume hood for incubator protection removes dangerous exhaust, airborne microbes, viruses/prions, and unwanted fumes.
We have a team of trained technician to provide you consultation and service for decontamination which includes site assessment, site preparation, decontamination process evaluation and decontamination efficacy validation.